Product Information
Ice Maker, Cube-Style, 30"W, water-cooled, self-contained condenser, production capacity up to 385 lb/24 hours at 700/500 (355 lb AHRI certified at 900/700), stainless steel finish, crescent cube style
Hoshizaki KML-325MWJ Description
The Hoshizaki KML-325MWJ ice machine head makes as much as 385 pounds of ice in 24 hours, ideal for use in smaller establishments that require a low volume of ice production each day. CycleSaver™ technology enables the machine to produce the same amount of ice as most similar ice makers in fewer cycles. Making crescent cubes, this unit is ideal for dispensing ice into buckets and cups for soft drinks or mixed drinks. If there is a system issue that requires maintenance, the EverCheck™ alert system notifies the operator with an audible alarm. H-Guard Plus® protection is built into the unit, slowing the growth of microbes between cleanings.
This Hoshizaki KML-325MWJ ice maker has a stainless steel exterior finish that supplies strength and corrosion resistance. It also features a stainless steel evaporator designed to ensure hard, clear ice production. This unit is designed for hardwired installation and has a self-contained condenser. Featuring a KM Edge system, the ice maker automatically adjusts to changing ambient conditions to optimize production. It measures 30 inches in width, enabling it to fit into narrow spaces in areas that don't have much room to spare for additional equipment.
Product Details
- 385-lb. maximum daily ice production
- 355-lb. AHRI-certified daily ice production
- Water cooled
- Makes individual crescent cube ice
- Crescent cube size: 11⁄8 in. W x 1⁄2 in. D x 11⁄2 in. H
- Optimizes product displacement
- Self-contained condenser
- Stainless steel finish resists corrosion
- Evercheck alert system simplifies maintenance
- Durable stainless steel evaporator produces hard, clear ice
- Automatically adjusts to changing conditions with KM Edge system
- Resists microbial growth with H-Guard Plus
- CycleSaver function produces more ice than other units in fewer cycles
- Recommended ambient air temperature: 45-100 degrees F
- Recommended incoming water temperature: 45-90 degrees F
- Recommended incoming water pressure: 10-113 PSI
- R-404A refrigerant
- 5,500-BTU heat transfer capacity
- Required clearance: 6 in. at rear, sides, and top
- Designed for hardwired installation
Dimensions & Utilities
- 30 in. W x 27.4 in. D x 22 in. H
- Plumbing inlet minimum requirements: 1⁄4-in. nominal ID copper water tubing
- Drain line minimum requirements: 3⁄4-in. nominal ID hard pipe
- 10.5 A, 4.7 kW
- 115-120 V/60 Hz/1 ph
From The Manufacturer
Ice Maker, Cube-Style, 30"W, water-cooled, self-contained condenser, production capacity up to 385 lb/24 hours at 70°/50° (355 lb AHRI certified at 90°/70°), stainless steel finish, crescent cube style, R-404A refrigerant, 115v/60/1-ph, 8.4 amps, NSF, UL
Hoshizaki KML-325MWJ Specifications
| Spec Attribute | Spec Value |
|---|---|
| Manufacturer | Hoshizaki |
| 24 Hr. Production (lb) | 385 |
| Amps | 8.4 |
| Compressor Type | Water Cooled |
| Depth (in) | 27.38 |
| Height (in) | 22 |
| Hertz | 60 |
| Ice Type | Crescent Cube |
| Special Features | CycleSaver™ |
| Voltage | 115 |
| Warranty | 3 year parts & labor/5 year parts on compressor/ 5 year parts & labor on Evaporator |
| Width (in) | 30 |
| Series | KML Series |
| Phase | 1 |
| Product | Ice Machine Heads |
| Product Type | Ice Makers & Bins |
| Cold Water (in) | 1/2 |
| Indirect Waste Size (in) | 3/4 |
| Weight | 185.00 |
Recommended for You
- Choosing a selection results in a full page refresh.